TLA_HOWTO - Recent changes to TLA_HOWTO
http://wiclear.free.fr/feed.php?feed_type=rss_1&full_content=1&title=TLA_HOWTO&lang=en
TLA_HOWTO historyTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=9
<h2>Introducing yourself to tla (optional)</h2>
<p>
If that's your first use of tla, it's better to introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2007-wiclear ~/archives/2006-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<h2>Retrieving latest developments</h2>
<p>
Then you have several options.
</p>
<h3>First possibility : by archiving my whole archive on your disk </h3>
<p>
You can mirror my archive on your disk (in that case, you must introduce yourself to tla, see above) :
</p>
<pre> tla register-archive david.jobet@free.fr--2007-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives-2007/
tla make-archive --mirror-from david.jobet@free.fr--2007-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2007-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear.<br />
First line declares a remote archive, second line create a locale archive that will host a remote archive. Those two lines must be executed only one.<br />
Third line asks the synchronisation of your local archive with my remove archive. You have to re-execute it each time you want to synchronize.
</p>
<p>
Then, it is like the second possibility (see below) : you can retrieve any version you want with command tla get, the difference is that the access is quicker (because it is local) :
</p>
<pre> tla get -A david.jobet@free.fr--2007-wiclear wiclear--dj--0.11
</pre>
<p>
If you don't want to always enter the -A command, you can enter the following command :
</p>
<pre> tla my-default-archive david.jobet@free.fr--2007-wiclear
</pre>
<p>
Then :
</p>
<pre> tla get wiclear--dj--0.11
</pre>
<h3>Second possibility : by getting the last snapshot of a particular branch</h3>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2007-wiclear http://david.jobet.free.fr/wiclear/archives-2007/
tla get david.jobet@free.fr--2007-wiclear/wiclear--dj--0.11--base-0 wiclear
</pre>
<p>
First line declares a remote archive, you must execute it only once.<br />
Second line retrieve the last version. You have to re-execute it each time you want to be up-to-date.<br />
Of course, you need to adapt the command line depending on which branch you want to retrieve. (See examples below)
</p>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li><li> <strong>wiclear--dj--0.5</strong> if you want 0.5 version + all patches
</li><li> <strong>wiclear--dj--0.6</strong> if you want 0.6 version + all patches
</li><li> <strong>wiclear--dj--0.7</strong> if you want 0.7 version + all patches
</li><li> <strong>wiclear--dj--0.8</strong> if you want 0.8 version + all patches
</li><li> <strong>wiclear--dj--0.9</strong> if you want 0.9 version + all patches
</li><li> <strong>wiclear--dj--0.10</strong> if you want 0.10 version + all patches
</li><li> <strong>wiclear--dj--0.11</strong> if you want 0.11 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.4 wiclear-0.4
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.5 wiclear-0.5
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.6 wiclear-0.6
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.7 wiclear-0.7
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.8 wiclear-0.8
tla get david.jobet@free.fr--2006-wiclear/wiclear--dj--0.9 wiclear-0.9
tla get david.jobet@free.fr--2006-wiclear/wiclear--dj--0.10 wiclear-0.10
tla get david.jobet@free.fr--2007-wiclear/wiclear--dj--0.11 wiclear-0.11
</pre>
<h2>My archives</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives/
</pre>
<p>
My 2005 archive is still available (versions 0.8 to 0.9) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
My 2006 archive is still available (versions 0.10 to 0.11) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2006/
</pre>
<p>
But I've switched to my new 2007 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2007/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<h3> Johannes Port</h3>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
<h3>Using Cygwin</h3>
<p>
Johannes Port seems not to work anymore since I'm using version 1.3.3.
Cygwin port seems to work ok for me.
</p>
<ul>
<li> Install <a rel="nofollow" class ="offsite httplnk" href="http://www.cygwin.com/">Cygwin</a>
</li><li> Verify librairy "expat" is selected and installed by Cygwin (it's located under libs when you're running the setup)
</li><li> Retrieve <a rel="nofollow" class ="offsite httplnk" href="http://www.geocities.com/lode_leroy/arch/">tla port on cygwin</a>
</li><li> Follow instructions
</li></ul>
<p>
Once you're done, the above Howto works without any problems. (You will have to present you to tla : tla my-id)
</p>2007-03-03T05:33:27+01:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=1182
<h2>Introducing yourself to tla (optional)</h2>
<p>
If that's your first use of tla, it's better to introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2007-wiclear ~/archives/2006-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<h2>Retrieving latest developments</h2>
<p>
Then you have several options.
</p>
<h3>First possibility : by archiving my whole archive on your disk </h3>
<p>
You can mirror my archive on your disk (in that case, you must introduce yourself to tla, see above) :
</p>
<pre> tla register-archive david.jobet@free.fr--2007-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives-2007/
tla make-archive --mirror-from david.jobet@free.fr--2007-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2007-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear.<br />
First line declares a remote archive, second line create a locale archive that will host a remote archive. Those two lines must be executed only one.<br />
Third line asks the synchronisation of your local archive with my remove archive. You have to re-execute it each time you want to synchronize.
</p>
<p>
Then, it is like the second possibility (see below) : you can retrieve any version you want with command tla get, the difference is that the access is quicker (because it is local) :
</p>
<pre> tla get -A david.jobet@free.fr--2007-wiclear wiclear--dj--0.11
</pre>
<p>
If you don't want to always enter the -A command, you can enter the following command :
</p>
<pre> tla my-default-archive david.jobet@free.fr--2007-wiclear
</pre>
<p>
Then :
</p>
<pre> tla get wiclear--dj--0.11
</pre>
<h3>Second possibility : by getting the last snapshot of a particular branch</h3>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2007-wiclear http://david.jobet.free.fr/wiclear/archives-2007/
tla get david.jobet@free.fr--2007-wiclear/wiclear--dj--0.11--base-0 wiclear
</pre>
<p>
First line declares a remote archive, you must execute it only once.<br />
Second line retrieve the last version. You have to re-execute it each time you want to be up-to-date.<br />
Of course, you need to adapt the command line depending on which branch you want to retrieve. (See examples below)
</p>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li><li> <strong>wiclear--dj--0.5</strong> if you want 0.5 version + all patches
</li><li> <strong>wiclear--dj--0.6</strong> if you want 0.6 version + all patches
</li><li> <strong>wiclear--dj--0.7</strong> if you want 0.7 version + all patches
</li><li> <strong>wiclear--dj--0.8</strong> if you want 0.8 version + all patches
</li><li> <strong>wiclear--dj--0.9</strong> if you want 0.9 version + all patches
</li><li> <strong>wiclear--dj--0.10</strong> if you want 0.10 version + all patches
</li><li> <strong>wiclear--dj--0.11</strong> if you want 0.11 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.4 wiclear-0.4
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.5 wiclear-0.5
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.6 wiclear-0.6
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.7 wiclear-0.7
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.8 wiclear-0.8
tla get david.jobet@free.fr--2006-wiclear/wiclear--dj--0.9 wiclear-0.9
tla get david.jobet@free.fr--2006-wiclear/wiclear--dj--0.10 wiclear-0.10
tla get david.jobet@free.fr--2006-wiclear/wiclear--dj--0.11 wiclear-0.11
</pre>
<h2>My archives</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives/
</pre>
<p>
My 2005 archive is still available (versions 0.8 to 0.9) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
My 2006 archive is still available (versions 0.10 to 0.11) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2006/
</pre>
<p>
But I've switched to my new 2007 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2007/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<h3> Johannes Port</h3>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
<h3>Using Cygwin</h3>
<p>
Johannes Port seems not to work anymore since I'm using version 1.3.3.
Cygwin port seems to work ok for me.
</p>
<ul>
<li> Install <a rel="nofollow" class ="offsite httplnk" href="http://www.cygwin.com/">Cygwin</a>
</li><li> Verify librairy "expat" is selected and installed by Cygwin (it's located under libs when you're running the setup)
</li><li> Retrieve <a rel="nofollow" class ="offsite httplnk" href="http://www.geocities.com/lode_leroy/arch/">tla port on cygwin</a>
</li><li> Follow instructions
</li></ul>
<p>
Once you're done, the above Howto works without any problems. (You will have to present you to tla : tla my-id)
</p>2007-03-03T05:30:51+01:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=1180
<h2>Introducing yourself to tla (optional)</h2>
<p>
If that's your first use of tla, it's better to introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2006-wiclear ~/archives/2006-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<h2>Retrieving latest developments</h2>
<p>
Then you have several options.
</p>
<h3>First possibility : by archiving my whole archive on your disk </h3>
<p>
You can mirror my archive on your disk (in that case, you must introduce yourself to tla, see above) :
</p>
<pre> tla register-archive david.jobet@free.fr--2006-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives-2006/
tla make-archive --mirror-from david.jobet@free.fr--2006-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2006-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear.<br />
First line declares a remote archive, second line create a locale archive that will host a remote archive. Those two lines must be executed only one.<br />
Third line asks the synchronisation of your local archive with my remove archive. You have to re-execute it each time you want to synchronize.
</p>
<p>
Then, it is like the second possibility (see below) : you can retrieve any version you want with command tla get, the difference is that the access is quicker (because it is local) :
</p>
<pre> tla get -A david.jobet@free.fr--2006-wiclear wiclear--dj--0.9
</pre>
<p>
If you don't want to always enter the -A command, you can enter the following command :
</p>
<pre> tla my-default-archive david.jobet@free.fr--2006-wiclear
</pre>
<p>
Then :
</p>
<pre> tla get wiclear--dj--0.9
</pre>
<h3>Second possibility : by getting the last snapshot of a particular branch</h3>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2006-wiclear http://david.jobet.free.fr/wiclear/archives-2006/
tla get david.jobet@free.fr--2006-wiclear/wiclear--dj--0.9--base-0 wiclear
</pre>
<p>
First line declares a remote archive, you must execute it only once.<br />
Second line retrieve the last version. You have to re-execute it each time you want to be up-to-date.<br />
Of course, you need to adapt the command line depending on which branch you want to retrieve. (See examples below)
</p>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li><li> <strong>wiclear--dj--0.5</strong> if you want 0.5 version + all patches
</li><li> <strong>wiclear--dj--0.6</strong> if you want 0.6 version + all patches
</li><li> <strong>wiclear--dj--0.7</strong> if you want 0.7 version + all patches
</li><li> <strong>wiclear--dj--0.8</strong> if you want 0.8 version + all patches
</li><li> <strong>wiclear--dj--0.9</strong> if you want 0.9 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.4 wiclear-0.4
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.5 wiclear-0.5
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.6 wiclear-0.6
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.7 wiclear-0.7
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.8 wiclear-0.8
tla get david.jobet@free.fr--2006-wiclear/wiclear--dj--0.9 wiclear-0.9
</pre>
<h2>My archives</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives/
</pre>
<p>
My 2005 archive is still available (versions 0.8 to 0.9) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
But I've switched to my new 2006 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2006/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<h3> Johannes Port</h3>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
<h3>Using Cygwin</h3>
<p>
Johannes Port seems not to work anymore since I'm using version 1.3.3.
Cygwin port seems to work ok for me.
</p>
<ul>
<li> Install <a rel="nofollow" class ="offsite httplnk" href="http://www.cygwin.com/">Cygwin</a>
</li><li> Verify librairy "expat" is selected and installed by Cygwin (it's located under libs when you're running the setup)
</li><li> Retrieve <a rel="nofollow" class ="offsite httplnk" href="http://www.geocities.com/lode_leroy/arch/">tla port on cygwin</a>
</li><li> Follow instructions
</li></ul>
<p>
Once you're done, the above Howto works without any problems. (You will have to present you to tla : tla my-id)
</p>2006-04-14T15:24:30+02:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=686
<h2>Introducing yourself to tla (optional)</h2>
<p>
If that's your first use of tla, it's better to introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2006-wiclear ~/archives/2006-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<h2>Retrieving latest developments</h2>
<p>
Then you have several options.
</p>
<h3>First possibility : by archiving my whole archive on your disk </h3>
<p>
You can mirror my archive on your disk (in that case, you must introduce yourself to tla, see above) :
</p>
<pre> tla register-archive david.jobet@free.fr--2006-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives-2006/
tla make-archive --mirror-from david.jobet@free.fr--2006-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2006-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear.<br />
First line declares a remote archive, second line create a locale archive that will host a remote archive. Those two lines must be executed only one.<br />
Third line asks the synchronisation of your local archive with my remove archive. You have to re-execute it each time you want to synchronize.
</p>
<p>
Then, it is like the second possibility (see below) : you can retrieve any version you want with command tla get, the difference is that the access is quicker (because it is local) :
</p>
<pre> tla get -A david.jobet@free.fr--2006-wiclear wiclear--dj--0.9
</pre>
<p>
If you don't want to always enter the -A command, you can enter the following command :
</p>
<pre> tla my-default-archive david.jobet@free.fr--2006-wiclear
</pre>
<p>
Then :
</p>
<pre> tla get wiclear--dj--0.9
</pre>
<h3>Second possibility : by getting the last snapshot of a particular branch</h3>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2006-wiclear http://david.jobet.free.fr/wiclear/archives-2006/
tla get david.jobet@free.fr--2006-wiclear/wiclear--dj--0.9--base-0 wiclear
</pre>
<p>
First line declares a remote archive, you must execute it only once.<br />
Second line retrieve the last version. You have to re-execute it each time you want to be up-to-date.<br />
Of course, you need to adapt the command line depending on which branch you want to retrieve. (See examples below)
</p>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li><li> <strong>wiclear--dj--0.5</strong> if you want 0.5 version + all patches
</li><li> <strong>wiclear--dj--0.6</strong> if you want 0.6 version + all patches
</li><li> <strong>wiclear--dj--0.7</strong> if you want 0.7 version + all patches
</li><li> <strong>wiclear--dj--0.8</strong> if you want 0.8 version + all patches
</li><li> <strong>wiclear--dj--0.9</strong> if you want 0.9 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.4 wiclear-0.4
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.5 wiclear-0.5
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.6 wiclear-0.6
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.7 wiclear-0.7
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.8 wiclear-0.8
tla get david.jobet@free.fr--2006-wiclear/wiclear--dj--0.9 wiclear-0.9
</pre>
<h2>My archives</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives/
</pre>
<p>
My 2005 archive is still available (versions 0.8 to 0.9) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
But I've switched to my new 2006 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2006/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
2006-03-12T22:38:30+01:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=654
<h2>Introducing yourself to tla (optional)</h2>
<p>
If that's your first use of tla, it's better to introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2005-wiclear ~/archives/2005-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<h2>Retrieving latest developments</h2>
<p>
Then you have several options.
</p>
<h3>First possibility : by archiving my whole archive on your disk </h3>
<p>
You can mirror my archive on your disk (in that case, you must introduce yourself to tla, see above) :
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives-2005/
tla make-archive --mirror-from david.jobet@free.fr--2005-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2005-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear.<br />
First line declares a remote archive, second line create a locale archive that will host a remote archive. Those two lines must be executed only one.<br />
Third line asks the synchronisation of your local archive with my remove archive. You have to re-execute it each time you want to synchronize.
</p>
<p>
Then, it is like the second possibility (see below) : you can retrieve any version you want with command tla get, the difference is that the access is quicker (because it is local) :
</p>
<pre> tla get -A david.jobet@free.fr--2005-wiclear wiclear--dj--0.7
</pre>
<p>
If you don't want to always enter the -A command, you can enter the following command :
</p>
<pre> tla my-default-archive david.jobet@free.fr--2005-wiclear
</pre>
<p>
Then :
</p>
<pre> tla get wiclear--dj--0.7
</pre>
<h3>Second possibility : by getting the last snapshot of a particular branch</h3>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear http://david.jobet.free.fr/wiclear/archives-2005/
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
First line declares a remote archive, you must execute it only once.<br />
Second line retrieve the last version. You have to re-execute it each time you want to be up-to-date.<br />
Of course, you need to adapt the command line depending on which branch you want to retrieve. (See examples below)
</p>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li><li> <strong>wiclear--dj--0.5</strong> if you want 0.5 version + all patches
</li><li> <strong>wiclear--dj--0.6</strong> if you want 0.6 version + all patches
</li><li> <strong>wiclear--dj--0.7</strong> if you want 0.7 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.4 wiclear-0.4
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.5 wiclear-0.5
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.6 wiclear-0.6
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.7 wiclear-0.7
</pre>
<h2>My archives</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives/
</pre>
<p>
But I've switched to my new 2005 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
2005-05-10T21:22:47+02:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=288
<h2>Introducing yourself to tla (optional)</h2>
<p>
If that's your first use of tla, it's better to introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2005-wiclear ~/archives/2005-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<h2>Retrieving latest developments</h2>
<p>
Then you have several options.
</p>
<h3>First possibility : by archiving my whole archive on your disk </h3>
<p>
You can mirror my archive on your disk (in that case, you must introduce yourself to tla, see above) :
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives-2005/
tla make-archive --mirror-from david.jobet@free.fr--2005-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2005-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear.<br />
First line declares a remote archive, second line create a locale archive that will host a remote archive. Those two lines must be executed only one.<br />
Third line asks the synchronisation of your local archive with my remove archive. You have to re-execute it each time you want to synchronize.
</p>
<h3>Second possibility : by getting the last snapshot of a particular branch</h3>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear http://david.jobet.free.fr/wiclear/archives-2005/
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
First line declares a remote archive, you must execute it only once.<br />
Second line retrieve the last version. You have to re-execute it each time you want to be up-to-date.<br />
Of course, you need to adapt the command line depending on which branch you want to retrieve. (See examples below)
</p>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li><li> <strong>wiclear--dj--0.5</strong> if you want 0.5 version + all patches
</li><li> <strong>wiclear--dj--0.6</strong> if you want 0.6 version + all patches
</li><li> <strong>wiclear--dj--0.7</strong> if you want 0.7 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.4 wiclear-0.4
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.5 wiclear-0.5
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.6 wiclear-0.6
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.7 wiclear-0.7
</pre>
<h2>My archives</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives/
</pre>
<p>
But I've switched to my new 2005 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
2005-05-10T21:08:02+02:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=287
<h2>Introducing yourself to tla (optional)</h2>
<p>
If that's your first use of tla, it's better to introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2005-wiclear ~/archives/2005-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<h2>Retrieving latest developments</h2>
<p>
Then you have several options.
</p>
<h3>First possibility : by archiving my whole archive on your disk</h3>
<p>
You can mirror my archive on your disk :
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives-2005/
tla make-archive --mirror-from david.jobet@free.fr--2005-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2005-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear.<br />
First line declares a remote archive, second line create a locale archive that will host a remote archive. Those two lines must be executed only one.<br />
Third line asks the synchronisation of your local archive with my remove archive. You have to re-execute it each time you want to synchronize.
</p>
<h3>Second possibility : by getting the last snapshot of a particular branch</h3>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear http://david.jobet.free.fr/wiclear/archives-2005/
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
First line declares a remote archive, you must execute it only once.<br />
Second line retrieve the last version. You have to re-execute it each time you want to be up-to-date.<br />
Of course, you need to adapt the command line depending on which branch you want to retrieve. (See examples below)
</p>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li><li> <strong>wiclear--dj--0.5</strong> if you want 0.5 version + all patches
</li><li> <strong>wiclear--dj--0.6</strong> if you want 0.6 version + all patches
</li><li> <strong>wiclear--dj--0.7</strong> if you want 0.7 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.4 wiclear-0.4
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.5 wiclear-0.5
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.6 wiclear-0.6
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.7 wiclear-0.7
</pre>
<h2>My archives</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives/
</pre>
<p>
But I've switched to my new 2005 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
2005-05-10T21:04:05+02:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=284
<h2>Introducing yourself to tla</h2>
<p>
If that's your first use of tla, you must first introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2005-wiclear ~/archives/2005-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<h2>Retrieving latest developments</h2>
<p>
Then you have several options.
</p>
<h3>First possibility : by archiving my whole archive on your disk</h3>
<p>
You can mirror my archive on your disk :
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives/
tla make-archive --mirror-from david.jobet@free.fr--2005-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2005-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear.<br />
First line declares a remote archive, second line create a locale archive that will host a remote archive. Those two lines must be executed only one.<br />
Third line asks the synchronisation of your local archive with my remove archive. You have to re-execute it each time you want to synchronize.
</p>
<h3>Second possibility : by getting the last snapshot of a particular branch</h3>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear http://david.jobet.free.fr/wiclear/archives/
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
First line declares a remote archive, you must execute it only once.<br />
Second line retrieve the last version. You have to re-execute it each time you want to be up-to-date.<br />
Of course, you need to adapt the command line depending on which branch you want to retrieve. (See examples below)
</p>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li><li> <strong>wiclear--dj--0.5</strong> if you want 0.5 version + all patches
</li><li> <strong>wiclear--dj--0.6</strong> if you want 0.6 version + all patches
</li><li> <strong>wiclear--dj--0.7</strong> if you want 0.7 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.4 wiclear-0.4
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.5 wiclear-0.5
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.6 wiclear-0.6
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.7 wiclear-0.7
</pre>
<h2>My archives</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2004/
</pre>
<p>
But I've switched to my new 2005 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
2005-05-10T20:53:21+02:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=283
<h2>Introducing yourself to tla</h2>
<p>
If that's your first use of tla, you must first introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2005-wiclear ~/archives/2005-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<h2>Retrieving latest developments</h2>
<p>
Then you have several options.
</p>
<h3>First possibility : by archiving my whole archive on your disk</h3>
<p>
You can mirror my archive on your disk :
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives/
tla make-archive --mirror-from david.jobet@free.fr--2005-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2005-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear
</p>
<h3>Second possibility : by getting the last snapshot of a particular branch</h3>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear http://david.jobet.free.fr/wiclear/archives/
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li><li> <strong>wiclear--dj--0.5</strong> if you want 0.5 version + all patches
</li><li> <strong>wiclear--dj--0.6</strong> if you want 0.6 version + all patches
</li><li> <strong>wiclear--dj--0.7</strong> if you want 0.7 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.4 wiclear-0.4
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.5 wiclear-0.5
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.6 wiclear-0.6
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.7 wiclear-0.7
</pre>
<h2>My archives</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2004/
</pre>
<p>
But I've switched to my new 2005 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
2005-05-10T20:34:37+02:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=281
<p>
If that's your first use of tla, you must first introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2005-wiclear ~/archives/2005-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<p>
Then you have several options.
You can mirror my archive on your disk :
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives/
tla make-archive --mirror-from david.jobet@free.fr--2005-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2005-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear
</p>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2005-wiclear http://david.jobet.free.fr/wiclear/archives/
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li><li> <strong>wiclear--dj--0.5</strong> if you want 0.5 version + all patches
</li><li> <strong>wiclear--dj--0.6</strong> if you want 0.6 version + all patches
</li><li> <strong>wiclear--dj--0.7</strong> if you want 0.7 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.4 wiclear-0.4
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.5 wiclear-0.5
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.6 wiclear-0.6
tla get david.jobet@free.fr--2005-wiclear/wiclear--dj--0.7 wiclear-0.7
</pre>
<h2>Update</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7) here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2004/
</pre>
<p>
But I've switched to my new 2005 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
2005-05-10T20:30:06+02:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=280
<p>
If that's your first use of tla, you must first introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2004-wiclear ~/archives/2004-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<p>
Then you have several options.
You can mirror my archive on your disk :
</p>
<pre> tla register-archive david.jobet@free.fr--2004-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives/
tla make-archive --mirror-from david.jobet@free.fr--2004-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2004-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear
</p>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2004-wiclear http://david.jobet.free.fr/wiclear/archives/
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.4 wiclear-0.4
</pre>
<h2>Update</h2>
<p>
My 2004 archive is still available (versions 0.1 to 0.7), but I've switched to my new 2005 archive that is available here :<br />
</p>
<pre> http://david.jobet.free.fr/wiclear/archives-2005/
</pre>
<p>
All further development will be done on that archive.
</p>
<h2>TLA on windows</h2>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:)
</li></ul>
2005-02-10T16:32:48+01:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=215
<p>
If that's your first use of tla, you must first introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2004-wiclear ~/archives/2004-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<p>
Then you have several options.
You can mirror my archive on your disk :
</p>
<pre> tla register-archive david.jobet@free.fr--2004-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives/
tla make-archive --mirror-from david.jobet@free.fr--2004-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2004-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear
</p>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2004-wiclear http://david.jobet.free.fr/wiclear/archives/
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.4 wiclear-0.4
</pre>
<h2>TLA on windows</h2>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO (but be sure to replace all Unix path like "~/wiclear" with a Windows path like "/wiclear" or "D:/
</li></ul>
2005-02-10T13:59:17+01:00XavierTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=214
<p>
If that's your first use of tla, you must first introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2004-wiclear ~/archives/2004-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<p>
Then you have several options.
You can mirror my archive on your disk :
</p>
<pre> tla register-archive david.jobet@free.fr--2004-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives/
tla make-archive --mirror-from david.jobet@free.fr--2004-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2004-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear
</p>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2004-wiclear http://david.jobet.free.fr/wiclear/archives/
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.4 wiclear-0.4
</pre>
<h2>TLA on windows</h2>
<p>
<a rel="nofollow" class ="offsite httplnk" href="http://wiki.gnuarch.org/moin.cgi/UsingJohannesPort?action=highlight&value=windows">UsingJohannesPort</a> you can use tla on windows.
</p>
<ul>
<li> <a rel="nofollow" class ="offsite httplnk" href="http://download.sipsolutions.de/tla-setup.exe">download it</a>
</li><li> create a new system variable called "HOME" (the new home of tla for storing his parameters)
</li><li> use tla with the command line and follow the above TLA_HOWTO
</li></ul>
2004-10-12T06:24:04+02:00XavierTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=44
<p>
If that's your first use of tla, you must first introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2004-wiclear ~/archives/2004-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<p>
Then you have several options.
You can mirror my archive on your disk :
</p>
<pre> tla register-archive david.jobet@free.fr--2004-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives/
tla make-archive --mirror-from david.jobet@free.fr--2004-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2004-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear
</p>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2004-wiclear http://david.jobet.free.fr/wiclear/archives/
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li><li> <strong>wiclear--dj--0.4--patch-1</strong> for 0.4 version
</li><li> <strong>wiclear--dj--0.4</strong> if you want 0.4 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.2 wiclear-0.2
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.3 wiclear-0.3
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.4 wiclear-0.4
</pre>2004-08-10T23:10:36+02:00David JobetTLA_HOWTO
http://wiclear.free.fr/index.php?title=TLA_HOWTO&mode=history_view&lang=en&id=5
<p>
If that's your first use of tla, you must first introduce yourself to tla :
</p>
<pre>tla my-id "Name <email@address>"
</pre>
<p>
Optionally, you can create your own archive :
</p>
<pre>mkdir archives
tla make-archive email@address--2004-wiclear ~/archives/2004-wiclear
</pre>
<p>
Of course you can choose another location for your archives instead of "archives".
</p>
<p>
Then you have several options.
You can mirror my archive on your disk :
</p>
<pre> tla register-archive david.jobet@free.fr--2004-wiclear-SOURCE http://david.jobet.free.fr/wiclear/archives/
tla make-archive --mirror-from david.jobet@free.fr--2004-wiclear-SOURCE ~/wiclear
tla archive-mirror david.jobet@free.fr--2004-wiclear
</pre>
<p>
Of course, you're free to choose another directory than just ~/wiclear
</p>
<p>
Or you can get directly a particular version on disk
</p>
<pre> tla register-archive david.jobet@free.fr--2004-wiclear http://david.jobet.free.fr/wiclear/archives/
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1--base-0 wiclear
</pre>
<p>
Interesting revisions :
</p>
<ul>
<li> <strong>wiclear--dj--0.1--base-0</strong> for 0.1 version
</li><li> <strong>wiclear--dj--0.1</strong>if you want 0.1 version + all patches
</li><li> <strong>wiclear--dj--0.2--base-0</strong> for 0.2 version
</li><li> <strong>wiclear--dj--0.2</strong> if you want 0.2 version + all patches
</li><li> <strong>wiclear--dj--0.3--patch-1</strong> for 0.3 version
</li><li> <strong>wiclear--dj--0.3</strong> if you want 0.3 version + all patches
</li></ul>
<p>
Examples :
</p>
<pre> tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1--base-0 wiclear-0.1
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.1 wiclear-0.1
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.2--base-0 wiclear-0.2
tla get david.jobet@free.fr--2004-wiclear/wiclear--dj--0.2 wiclear-0.2
</pre>2004-07-14T23:24:21+02:00David Jobet